A wall bars made in Poland conforming to European safety standards PN-EN 12346:2001, PN-EN 913:2019-3 for gymnastic equipment.
BenchK 232W wall bars is a combination of BenchK 200W wall bars with additional equipment comprising:
- removable pull up bar PB3W;
- dip bar DB1W.
PB3W pull-up bar has 4 hooks with felt lining, which makes it possible to change its height or position. This can be done by a single adult. When the pull up bar is flipped it can serve as a barbell rest. The maximum barbell weight is 200kg/441 lbs.
DB1W dip bar has elbow pads and back support made of integral polyurethane foam. This guarantees their durability, ease of cleaning and modern look. Each additional element can be adjusted to the user’s height or completely removed, if needed.
Includes an assembly kit (does not include wall mounting set, as its type depends on the type of wall which the wall bars will be attached to). The decision and responsibility for the method of installation of the wall bars rests with the customer. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations.
For stud wall contruction houses, it is required to use BenchK WHB+S8 or WHW+S8 wall holder for a wall bar to have it safely secured to the wall.
Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.
